Skip to content

RealPlanes

A RealPlane is a single aircraft with its own registration, for example D-AIND. It behaves like a real aircraft: it stays exactly where the last pilot parked it. You take it over at its parking position, fly the next leg and park it at your destination. The next pilot then continues from there.

RealPlanes belong to an aircraft type such as A20N or A359. You fly them with your own aircraft in the simulator; the type must match.

Requirements

  • the Windows client with a SimBrief flight plan – without a SimBrief plan there is no RealPlane to choose
  • Microsoft Flight Simulator
  • for some aircraft a minimum airtime (see below)

Which RealPlanes you can fly

  • fsAirSync aircraft (no VA): everyone. Some of them are assigned to a real-world airline, for example D-AIND to DLH. This is only a label.
  • Aircraft of your VA: all members of the VA.
  • Aircraft of other VAs: only if the VA has opened them to everyone.
  • Minimum airtime: some aircraft require a certain number of hours in the air on FSAirSync. Until you have them, the aircraft does not show up for you.

You find all RealPlanes you can fly in the web portal under My area → RealPlanes, with location, status and number of legs. The public page /realplanes shows all RealPlanes on a map, with a list underneath and a page for each aircraft showing its last legs.

Finding a real flight (RealFlights)

Not sure where to go next? Each aircraft page on /realplanes has a Departures section next to the last legs. It lists real scheduled departures from the airport where the aircraft is parked right now. The data comes from FlightAware.

Requirements

  • you are logged in to the web portal
  • your SimBrief ID is saved in your profile (My area → Profile)
  • you are allowed to fly this RealPlane (see above)

Otherwise the section only shows a note telling you what is missing.

  1. Open the aircraft page, for example D-AIND, and click Check departures. The list is only loaded when you click.
  2. You see the real departures for the next two hours: time in Zulu, flight, destination and aircraft type. Rows with the same aircraft type as your RealPlane are highlighted. You can still pick any flight you like.
  3. Load later shows the next departures. At small airports the first window may be empty. Then use Load later to look further ahead.
  4. Click Plan in the row of the flight you want. A window opens:
    • Type and Origin come from the RealPlane and cannot be changed.
    • Destination and Flight number are taken from the real flight.
    • Callsign is a suggestion from your VA's or airline's prefix plus three characters, for example DLH3ME. You can change it.
    • Departure (Zulu) is set to 15 minutes from now.
  5. Click Plan in SimBrief. SimBrief opens in a new tab with everything filled in. If a SimBrief airframe is set for the aircraft, it is used.
  6. Generate the OFP in SimBrief. Afterwards SimBrief takes you to a confirmation page with a link back to the aircraft.

Planning does not reserve the aircraft. It is only yours once you take it over in the client (see below). If another pilot is faster, the aircraft is gone.

Tip

The aircraft page shows a short confirmation after Plan in SimBrief and hides the list. Choose another flight brings the list back.

Taking over a RealPlane

  1. In the simulator, load your aircraft at the airport where the RealPlane is parked, at any gate. Stay on the ground and stand still.
  2. In the client, load a SimBrief plan departing from this airport with the matching aircraft type.
  3. Below the aircraft type a RealPlane selection appears with all aircraft you can fly there. If the registration of your SimBrief plan is in the list, it is already selected.
  4. Choose the aircraft and click Start flight.
  5. The client asks: Take over D-AIND – it was parked at EDDE on 12.11. at 17:06. Your aircraft will now be moved to this parking position (350 m from you). Click Yes.
  6. Your aircraft now stands exactly at the stored position, with the same heading. The flight starts.

From now on the aircraft is reserved for you – nobody else can take it until your leg has ended. The live map shows its registration next to your callsign.

Notes in the selection

  • available from 17:30 – the aircraft is still in its ground time after the last leg. It becomes selectable on its own once the time is over; just open the selection again.
  • No exact parking position yet – the aircraft has never been flown. You start at any gate at its home base, and the client does not move you.
  • Your SimBrief profile differs – the aircraft has a SimBrief airframe profile (e.g. Fenix A320 IAE) and your plan uses a different one. This is only a note; you can still fly it.

When the start is refused

  • You are not at the departure airport of your plan (more than 5 NM away). With a RealPlane this check is strict, without the usual "Start anyway?".
  • You are not standing still on the ground.
  • Already in use – another pilot has just taken the aircraft.
  • The aircraft is still in its ground time, is being deleted, or you are not allowed to fly it.

If you answer No to the question, the flight does not start and the aircraft remains available.

Do not relocate after the take-over

A RealPlane you take over must depart from its parking position. Until take-off the client checks that your aircraft only taxies and does not jump. Pushback, also with GSX, and taxiing are fine.

If you relocate your aircraft to another gate after the start – for example with the GSX gate change, with slew or any other tool – the RealPlane is released. Your flight continues normally, but without the RealPlane: the aircraft stays at its previous parking position and is available again right away, and there is no RealPlane bonus. The client tells you so in the status line.

If the parking position does not fit your scenery, better end the flight and report it on Discord.

Finishing the leg

  1. Land, taxi to your gate and park.
  2. Park the aircraft the way you would in real life – at a suitable gate or stand. The next pilot takes over exactly this position.
  3. Click Finish leg – or, if you are done for the day, End flight. After a landing, both park the aircraft.

The status line tells you what happened, for example Leg finished. D-AIND is now parked at EDDN. The exact position is now stored, and the aircraft is shown at the new airport.

  • Diversion: the aircraft is parked where you actually landed, not at the destination of your plan.
  • Ground time: after each leg the aircraft is unavailable for a while, usually 15 minutes. This also applies to you if you want to fly the next leg with it.
  • No known airport nearby: if there is no airport within 5 km of your parking position, nothing is stored and the aircraft stays where it was before. The client tells you so.

Aborting a flight

If you end the flight without finishing the leg – or the simulator or client crashes – no new position is stored. The aircraft stays at its previous parking position and becomes available again – right away if you cancel before the flight has really started, otherwise at the latest after 15 minutes without reports.

ActiveXP

Each leg in which you take over a parked RealPlane earns you +10 ActiveXP on top of the usual points – also when you continue with the aircraft you parked yourself. Take-off and landing are required. The first flight of a new aircraft without a parking position does not earn the bonus. See ActiveXP.

For VA owners

An fsAirSync admin can enable RealPlanes for your VA. After that you find My area → Manage RealPlanes, where you can:

  • create aircraft with registration, aircraft type, home base and optionally a SimBrief airframe ID,
  • open an aircraft to everyone (Open to everyone) – changes apply from the next leg, a running flight is never interrupted,
  • set a minimum airtime and the ground time,
  • see the location of your aircraft on a map, and on the edit page the exact parking position in satellite view,
  • mark an aircraft for deletion. It can no longer start flights immediately and is deleted for good after one week, with all its details. Until then you can restore it.

Every registration exists only once. It becomes free again only after the aircraft has been deleted.

If a parking position turns out to be unusable, for example because the gate does not exist in a common scenery, please report it on Discord. An admin can clear the exact position; the next flight then only has to start at the same airport.

Limits

  • Stored are coordinates, not gate names. With a different airport scenery the position may be slightly next to the gate. Differences in terrain height are compensated.
  • With auto-start enabled, the client moves you without asking, just like it skips the other start questions.
  • RealPlanes are separate from Real Stand, which stores parking positions of your VA's phpVMS fleet.